How to extend the service life of hydraulic press?

Hai San hydraulic equipment to explain to you how to extend the service life of hydraulic press?

The correct operation according to the rules is the necessary prerequisite for the safe production of hydraulic press, on the basis of which attention should be paid to maintenance, in order to effectively extend the service life of hydraulic press.

First of all, to be familiar with the hydraulic machine structure and characteristics, unfamiliar personnel operating the machine can only be at their own risk, lubrication before work, in the course of the operation of the hydraulic machine is strictly prohibited to repair or adjust the mold, if it is found that the action is not reliable, the machine should be stopped and checked as soon as possible when the noise is big or the vibration is big, and it is forbidden to work with disease, the normal eccentricity of the hydraulic press is about 40mm, and it is forbidden to use it beyond the maximum eccentricity or the maximum stroke of the slider, according to the process requirements to adjust the pressure and height, pressure after 10 minutes stop pressure, pressure drop should not be more than 20mm.

The rules for normal operation of the hydraulic press are kept in mind at all times, and maintenance is also part of the job. After the hydraulic press has been running for 600 hours, first-level maintenance should be carried out, mainly with the cooperation of the operators as the main maintenance personnel, cleaning hydraulic machine surface to keep clean, no rust no yellow robe, defective screws, nuts, signs and buttons are complete, upper and lower beams, movable beams and column guide rails to be clean in place, and repair the surface and Burr, check the fastener, hydraulic pump, valve, fuel tank and pipeline to maintain no oil stains, no leakage, cleaning cups, filters, dredge oil, timely addition of oil, regularly check the pressure gauge, column and guide rail lubrication, finally, do not forget to wipe the electrical box, maintain no dust and no grease.

Dongguan Dalang Haishan hydraulic machinery factory is a professional design, manufacture, production, maintenance as one of the hydraulic company, the company mainly engaged in the production of hydraulic cylinder, hydraulic system, hydraulic machine, hydraulic cylinder test bed, hydraulic power unit and other non-standard hydraulic machinery manufacturers, and undertake the maintenance and transformation of hydraulic machinery and equipment, professional agents at home and abroad well-known brand hydraulic components.